Influencia de la adición de viruta de acero en la resistencia a compresión en ladrillos artesanales en prismas de albañileria

Hernandez Rodriguez Jasmin Yahira; Vaca Rodriguez John Jorginho; Sagástegui Vásquez Germán

Influencia de la adición de viruta de acero en la resistencia a compresión en ladrillos artesanales en prismas de albañileria

Translated title of the contribution: Influence of The Addition of Steel Chips on the Compression Resistance of Artisan Bricks in Masonry Prisms

Hernandez Rodriguez Jasmin Yahira, Vaca Rodriguez John Jorginho, Sagástegui Vásquez Germán

Engineering

Universidad Privada del Norte

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

This research aims to determine the influence of the addition of steel shavings (VA) on the compressive strength of artisan bricks in masonry prisms, for which 30 prisms were made, each prism made up of three bricks and a 1.5 joint. cm, 6 of these for each percentage that was 0%, 5%, 10%, 15% and 20% addition of steel chips. The research is experimental and according to its nature it is quantitative. The results indicate that for an addition of 15% (V.A.), the compressive strength in brick units increases and is optimal, resulting in 74.31 kg/cm² unlike the standard brick, which is 54.33 kg/cm^2; In prisms the same thing happens for an addition of 15% (V.A.) the compressive strength reaches 49.30 kg/cm² unlike the standard prism which is 23.88 kg/cm² however, if the resistances are added to more than this percentage they start to go down. It was concluded that the influence of the addition of (V.A.) in handmade bricks and masonry prisms has a positive influence, improving this property by 206.44% with respect to the standard prisms, but up to 15% of addition of (V.A.).

Translated title of the contribution	Influence of The Addition of Steel Chips on the Compression Resistance of Artisan Bricks in Masonry Prisms
Original language	Spanish
Title of host publication	Proceedings of the 21st LACCEI International Multi-Conference for Engineering, Education and Technology
Subtitle of host publication	Leadership in Education and Innovation in Engineering in the Framework of Global Transformations: Integration and Alliances for Integral Development, LACCEI 2023
Editors	Maria M. Larrondo Petrie, Jose Texier, Rodolfo Andres Rivas Matta
ISBN (Electronic)	9786289520743
State	Published - 2023
Event	21st LACCEI International Multi-Conference for Engineering, Education and Technology, LACCEI 2023 - Buenos Aires, Argentina Duration: 19 Jul 2023 → 21 Jul 2023

Publication series

Name	Proceedings of the LACCEI international Multi-conference for Engineering, Education and Technology
Volume	2023-July
ISSN (Electronic)	2414-6390

Conference

Conference	21st LACCEI International Multi-Conference for Engineering, Education and Technology, LACCEI 2023
Country/Territory	Argentina
City	Buenos Aires
Period	19/07/23 → 21/07/23

Cite this

Yahira, H. R. J., Jorginho, V. R. J., & Germán, S. V. (2023). Influencia de la adición de viruta de acero en la resistencia a compresión en ladrillos artesanales en prismas de albañileria. In M. M. Larrondo Petrie, J. Texier, & R. A. R. Matta (Eds.), Proceedings of the 21st LACCEI International Multi-Conference for Engineering, Education and Technology: Leadership in Education and Innovation in Engineering in the Framework of Global Transformations: Integration and Alliances for Integral Development, LACCEI 2023 (Proceedings of the LACCEI international Multi-conference for Engineering, Education and Technology; Vol. 2023-July).

Yahira, Hernandez Rodriguez Jasmin ; Jorginho, Vaca Rodriguez John ; Germán, Sagástegui Vásquez. / Influencia de la adición de viruta de acero en la resistencia a compresión en ladrillos artesanales en prismas de albañileria. Proceedings of the 21st LACCEI International Multi-Conference for Engineering, Education and Technology: Leadership in Education and Innovation in Engineering in the Framework of Global Transformations: Integration and Alliances for Integral Development, LACCEI 2023. editor / Maria M. Larrondo Petrie ; Jose Texier ; Rodolfo Andres Rivas Matta. 2023. (Proceedings of the LACCEI international Multi-conference for Engineering, Education and Technology).

@inproceedings{7ba14b98c98649939568647659c216cf,

title = "Influencia de la adici{\'o}n de viruta de acero en la resistencia a compresi{\'o}n en ladrillos artesanales en prismas de alba{\~n}ileria",

abstract = "This research aims to determine the influence of the addition of steel shavings (VA) on the compressive strength of artisan bricks in masonry prisms, for which 30 prisms were made, each prism made up of three bricks and a 1.5 joint. cm, 6 of these for each percentage that was 0%, 5%, 10%, 15% and 20% addition of steel chips. The research is experimental and according to its nature it is quantitative. The results indicate that for an addition of 15% (V.A.), the compressive strength in brick units increases and is optimal, resulting in 74.31 kg/cm2 unlike the standard brick, which is 54.33 kg/cm2; In prisms the same thing happens for an addition of 15% (V.A.) the compressive strength reaches 49.30 kg/cm2 unlike the standard prism which is 23.88 kg/cm2 however, if the resistances are added to more than this percentage they start to go down. It was concluded that the influence of the addition of (V.A.) in handmade bricks and masonry prisms has a positive influence, improving this property by 206.44% with respect to the standard prisms, but up to 15% of addition of (V.A.).",

keywords = "Compressive Strength, Prisms, Steel Chips (V.A..), influence",

author = "Yahira, {Hernandez Rodriguez Jasmin} and Jorginho, {Vaca Rodriguez John} and Germ{\'a}n, {Sag{\'a}stegui V{\'a}squez}",

note = "Publisher Copyright: {\textcopyright} 2023 Latin American and Caribbean Consortium of Engineering Institutions. All rights reserved.; 21st LACCEI International Multi-Conference for Engineering, Education and Technology, LACCEI 2023 ; Conference date: 19-07-2023 Through 21-07-2023",

year = "2023",

language = "Espa{\~n}ol",

series = "Proceedings of the LACCEI international Multi-conference for Engineering, Education and Technology",

editor = "{Larrondo Petrie}, {Maria M.} and Jose Texier and Matta, {Rodolfo Andres Rivas}",

booktitle = "Proceedings of the 21st LACCEI International Multi-Conference for Engineering, Education and Technology",

}

Yahira, HRJ, Jorginho, VRJ & Germán, SV 2023, Influencia de la adición de viruta de acero en la resistencia a compresión en ladrillos artesanales en prismas de albañileria. in MM Larrondo Petrie, J Texier & RAR Matta (eds), Proceedings of the 21st LACCEI International Multi-Conference for Engineering, Education and Technology: Leadership in Education and Innovation in Engineering in the Framework of Global Transformations: Integration and Alliances for Integral Development, LACCEI 2023. Proceedings of the LACCEI international Multi-conference for Engineering, Education and Technology, vol. 2023-July, 21st LACCEI International Multi-Conference for Engineering, Education and Technology, LACCEI 2023, Buenos Aires, Argentina, 19/07/23.

Influencia de la adición de viruta de acero en la resistencia a compresión en ladrillos artesanales en prismas de albañileria. / Yahira, Hernandez Rodriguez Jasmin; Jorginho, Vaca Rodriguez John; Germán, Sagástegui Vásquez.
Proceedings of the 21st LACCEI International Multi-Conference for Engineering, Education and Technology: Leadership in Education and Innovation in Engineering in the Framework of Global Transformations: Integration and Alliances for Integral Development, LACCEI 2023. ed. / Maria M. Larrondo Petrie; Jose Texier; Rodolfo Andres Rivas Matta. 2023. (Proceedings of the LACCEI international Multi-conference for Engineering, Education and Technology; Vol. 2023-July).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Influencia de la adición de viruta de acero en la resistencia a compresión en ladrillos artesanales en prismas de albañileria

AU - Yahira, Hernandez Rodriguez Jasmin

AU - Jorginho, Vaca Rodriguez John

AU - Germán, Sagástegui Vásquez

PY - 2023

Y1 - 2023

N2 - This research aims to determine the influence of the addition of steel shavings (VA) on the compressive strength of artisan bricks in masonry prisms, for which 30 prisms were made, each prism made up of three bricks and a 1.5 joint. cm, 6 of these for each percentage that was 0%, 5%, 10%, 15% and 20% addition of steel chips. The research is experimental and according to its nature it is quantitative. The results indicate that for an addition of 15% (V.A.), the compressive strength in brick units increases and is optimal, resulting in 74.31 kg/cm2 unlike the standard brick, which is 54.33 kg/cm2; In prisms the same thing happens for an addition of 15% (V.A.) the compressive strength reaches 49.30 kg/cm2 unlike the standard prism which is 23.88 kg/cm2 however, if the resistances are added to more than this percentage they start to go down. It was concluded that the influence of the addition of (V.A.) in handmade bricks and masonry prisms has a positive influence, improving this property by 206.44% with respect to the standard prisms, but up to 15% of addition of (V.A.).

AB - This research aims to determine the influence of the addition of steel shavings (VA) on the compressive strength of artisan bricks in masonry prisms, for which 30 prisms were made, each prism made up of three bricks and a 1.5 joint. cm, 6 of these for each percentage that was 0%, 5%, 10%, 15% and 20% addition of steel chips. The research is experimental and according to its nature it is quantitative. The results indicate that for an addition of 15% (V.A.), the compressive strength in brick units increases and is optimal, resulting in 74.31 kg/cm2 unlike the standard brick, which is 54.33 kg/cm2; In prisms the same thing happens for an addition of 15% (V.A.) the compressive strength reaches 49.30 kg/cm2 unlike the standard prism which is 23.88 kg/cm2 however, if the resistances are added to more than this percentage they start to go down. It was concluded that the influence of the addition of (V.A.) in handmade bricks and masonry prisms has a positive influence, improving this property by 206.44% with respect to the standard prisms, but up to 15% of addition of (V.A.).

KW - Compressive Strength

KW - Prisms

KW - Steel Chips (V.A..)

KW - influence

UR - http://www.scopus.com/inward/record.url?scp=85172392129&partnerID=8YFLogxK

M3 - Contribución a la conferencia

AN - SCOPUS:85172392129

T3 - Proceedings of the LACCEI international Multi-conference for Engineering, Education and Technology

BT - Proceedings of the 21st LACCEI International Multi-Conference for Engineering, Education and Technology

A2 - Larrondo Petrie, Maria M.

A2 - Texier, Jose

A2 - Matta, Rodolfo Andres Rivas

T2 - 21st LACCEI International Multi-Conference for Engineering, Education and Technology, LACCEI 2023

Y2 - 19 July 2023 through 21 July 2023

ER -

Yahira HRJ, Jorginho VRJ, Germán SV. Influencia de la adición de viruta de acero en la resistencia a compresión en ladrillos artesanales en prismas de albañileria. In Larrondo Petrie MM, Texier J, Matta RAR, editors, Proceedings of the 21st LACCEI International Multi-Conference for Engineering, Education and Technology: Leadership in Education and Innovation in Engineering in the Framework of Global Transformations: Integration and Alliances for Integral Development, LACCEI 2023. 2023. (Proceedings of the LACCEI international Multi-conference for Engineering, Education and Technology).

Influencia de la adición de viruta de acero en la resistencia a compresión en ladrillos artesanales en prismas de albañileria

Abstract

Publication series

Conference

Other files and links

Fingerprint

Cite this